Translations:Wasseraufbereitung und Grauwassernutzung/946/en
Aus INTEWA Wiki
Version vom 21. Februar 2019, 09:09 Uhr von Sabrina (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „* A biolayer forms on the membrane fibres * Depending on the water quality and cleaning mode with backwash and aeration, the membrane will stabilize to a const…“)
- A biolayer forms on the membrane fibres
- Depending on the water quality and cleaning mode with backwash and aeration, the membrane will stabilize to a constant flow rate
- The stabilization value is used for flow rate simulations. In the example, the stabilization value is approximately 50 L/m²/hr/bar. The stabilization value is dependent on operation settings, flow rate, wastewater quality, temperature and pre-treatment.
